EVALARM has the additional module, “Dead Man's Switch,” and supports you for single station monitoring and occupational safety.
With the dead man switch, the user can at any time issue a deliberate alert and thus call for help.
In the case of an alert, the persons stored in the alert process are immediately alerted.
Activate the dead man's switch
You will find the button for the dead man's switch in the upper right corner of the EVALARM app.
You can see the period after which the predefined SOS alert is triggered here.
Presently, the period is set to 15 minutes. An individually adjustable time will come with the next EVALARM update.
In addition, you can activate the updating of standalone monitoring by GPS movement. No manual action is necessary.
The GPS function of your phone must be activated.
You can also add a message to explain the location and reason for the alert.
The alert levels of the dead man's switch
When the alert is started, the countdown begins.
You can reset this to the beginning at any time by pressing the button.
Furthermore, you can trigger an SOS alarm manually before the time runs out or terminate the monitoring early.
Pre - alert 1
Once there are only two minutes remaining, the first pre-alert starts. The screen of your phone will begin to flash and your phone will vibrate.
Pre - alert 2
If only a minute remains, then the predefined ringtone is added. This remains until the countdown has expired.
SOS Alert is triggered
If the alert is not interrupted by the dead man’s switch, an SOS alarm is triggered.
You can terminate it immediately with the everything okay response.
Otherwise an SOS alert is triggered, in which the user, contact details and GPS location is transmitted to the pre-defined address in the workflows.
Überblick
Inhalte